12 1 - cathode 2 - anode back of case - cathode apt60s20b (g) 200v 75a apt60s20s (g) 200v 75a 053-6042 rev d 7-2006 to-247 1 2 d 3 pak 1 2 static electrical characteristics maximum ratings all ratings: t c = 25c unless otherwise specified. product benefits ? low losses ? low noise switching ? cooler operation ? higher reliability systems ? increased system power density product features ? ultrafast recovery times ? soft recovery characteristics ? popular to-247 package or surface mount d 3 pak package ? low forward voltage ? high blocking voltage ? low leakage current high voltage schottky diode product applications ? parallel diode -switchmode power supply -inverters ? free wheeling diode -motor controllers -converters ? snubber diode ? uninterruptible power supply (ups) ? 48 volt output rectifiers ? high speed rectifiers symbol v f i rm c t unit volts m a pf min typ m a x .83 .90 .98 .72 1 25 300 forward voltage maximum reverse leakage current junction capacitance, v r = 200v i f = 60a i f = 120a i f = 60a, t j = 125c v r = 200v v r = 200v, t j = 125c characteristic / test conditions maximum d.c. reverse voltage maximum peak repetitive reverse voltage maximum working peak reverse voltage maximum average forward current (t c = 123c, duty cycle = 0.5) rms forward current (square wave, 50% duty) non-repetitive forward surge current (t j = 45c, 8.3ms) operating and storagetemperature range lead temperature for 10 sec. avalanche energy (2a, 30mh) symbol v r v rrm v rwm i f (av) i f (rms) i fsm t j ,t stg t l e val unit volts amps c mj apt60s20b_s (g) 200 75 208 600 -55 to 150 300 60 microsemi website - http://www.microsemi.com http://
dynamic characteristics apt60s20b_s(g) 053-6042 rev d 7-2006 thermal and mechanical characteristics microsemi reserves the right to change, without notice, the specifications and information contained herein. characteristic / test conditions junction-to-case thermal resistance junction-to-ambient thermal resistance package weight maximum mounting torque symbol r jc r ja w t torque min typ m a x .30 40 0.22 5.9 10 1.1 unit c/w oz g lb?in n?m min typ max - 55 - 160 -5 - - 100 - 490 -1 0 - -8 0 - 1100 -2 7 unit ns nc amps ns nc amps ns nc amps characteristic reverse recovery time reverse recovery charge maximum reverse recovery current reverse recovery time reverse recovery charge maximum reverse recovery current reverse recovery time reverse recovery charge maximum reverse recovery current symbol t rr q rr i rrm t rr q rr i rrm t rr q rr i rrm test conditions i f = 60a, di f /dt = -200a/ s v r = 133v, t c = 25 c i f = 60a, di f /dt = -200a/ s v r = 133v, t c = 125 c i f = 60a, di f /dt = -700a/ s v r = 133v, t c = 125 c z jc , thermal impedance (c/w) 10 -5 10 -4 10 -3 10 -2 10 -1 1.0 rectangular pulse duration (seconds) figure 1a. maximum effective transient thermal impedance, junction-to-case vs. pulse duration 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 note: duty factor d = t 1 / t 2 peak t j = p dm x z jc + t c t 1 t 2 p dm single pulse 0.1 0.3 0.7 d = 0.9 0.05 figure 1b, transient thermal impedance model 0.5 0.0218 0.119 0.160 0.00450 0.0119 0.121 dissipated power (watts) t j ( c) t c ( c) z ext are the external thermal impedances: case to sink, sink to ambient, etc. set to zero when modeling only the case to junction. z ext
053-6042 rev d 7-2006 apt60s20b_s (g) typical performance curves t j = 125c v r = 133v 60a 120a q rr , reverse recovery charge i f , forward current (nc) (a) i rrm , reverse recovery current t rr , reverse recovery time (a) (ns) t j = -55c t j = 25c t j = 125c t j = 150c duty cycle = 0.5 t j = 150c 30a 0 0.2 0.4 0.6 0.8 1 1.2 0 200 400 600 800 0 200 400 600 800 0 200 400 600 800 200 180 160 140 120 100 80 60 40 20 0 1800 1600 1400 1200 1000 800 600 400 200 0 t j = 125c v r = 133v t j = 125c v r = 133v 60a 30a 120a 120a 60a 30a 120 100 80 60 40 20 0 35 30 25 20 15 10 5 0 q rr t rr t rr q rr i rrm lead temperature limited v f , anode-to-cathode voltage (v) -di f / dt, current rate of change(a/ s) figure 2. forward current vs. forward voltage figure 3. reverse recovery time vs. current rate of change -di f / dt, current rate of change (a/ s) -di f / dt, current rate of change (a/ s) figure 4. reverse recovery charge vs. current rate of change figure 5. reverse recovery current vs. current rate of change t j , junction temperature (c) case temperature (c) figure 6. dynamic parameters vs. junction temperature figure 7. maximum average forward current vs. casetemperature v r , reverse voltage (v) time in avalanche ( s) figure 8. junction capacitance vs. reverse voltage figure 9. single pulse uis soa 0 2 5 5 0 7 5 100 125 150 2 5 5 0 7 5 100 125 150 1 1 0 100 200 1 1 0 100 1000 220 0 1.2 1.0 0.8 0.6 0.4 0.2 0.0 3500 3000 2500 2000 1500 1000 50 0 250 200 150 100 50 0 100 50 10 5 1 c j , junction capacitance k f , dynamic parameters (pf) (normalized to 700a/s) peak avalanche current i f(av) (a) (a)
apt60s20b_s (g) 053-6042 rev d 7-2006 4 3 1 2 5 5 zero 1 2 3 4 di f / dt - rate of diode current change through zero crossing. i f - forward conduction current i rrm - maximum reverse recovery current. t rr - reverse r ecovery time, measured from zero crossing where diode q rr - area under the curve defined by i rrm and t rr . current goes from positive to negative, to the point at which the straight line through i rrm and 0.25 i rrm passes through zero. figure 9. diode test circuit figure 10, diode reverse recovery waveform and definitions 0.25 i rrm pearson 2878 current transformer di f / dt adjust 30 h d.u.t. +18v 0v v r t rr / q rr waveform apt20m36bll to - 247 package outline d 3 pak package outline 15.85 (.624) 16.05 (.632) 18.70 (.736) 19.10 (.752) 1.15 (.045) 1.45 (.057) 5.45 (.215) bsc (2 plcs.) 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 2.70 (.106) 2.90 (.114) 0.40 (.016) 0.65 (.026) dimensions in millimeters (inches) heat sink (cathode) and leads are plated 2.40 (.094) 2.70 (.106) (base of lead) cathode (heat sink) 1.90 (.075) 2.10 (.083) cathode anode 0.020 (.001) 0.250 (.010) 1.20 (.047) 1.40 (.055) 12.40 (.488) 12.70 (.500) 13.30 (.524) 13.60 (.535) 1.00 (.039) 1.15 (.045) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 6.15 (.242) bsc 4.50 (.177) max. 19.81 (.780) 20.32 (.800) 20.80 (.819) 21.46 (.845) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 10.90 (.430) bsc 3.50 (.138) 3.81 (.150) 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 2.21 (.087) 2.59 (.102) 0.40 (.016) 0.79 (.031) dimensions in millimeters and (inches) cathode anode cathode
|
